Home Uncategorized Review of Azeroth RTA by CoilART

Review of Azeroth RTA by CoilART

168
0
SHARE

Overview

CoilART released the Azeroth RDA and Azeroth RTA. Both devices have patented triple coil deck. The only difference between the two is that the RTA includes a second velocity-style deck. This deck is used for dual coil build.

Design and quality

Once you get a hold of the Azeroth RTA, you will notice that it is made with a velocity-style deck. The device has been designed for an easy use. There are Philp’s screws used to attach the posts of the deck. When you are going to install the coils just make sure that these have to be centered over the bottom air vents. This has to be precisely done in order for the coils to work perfectly when vaping. 

The wick of the Azeroth RTA has to be installed snug and not too tight in the coil. You also have to make sure that the ends of the coils are trimmed so it will sit properly above the bottom air vent. Before you trim it down, make sure that the cotton that you are going to use is stuffed properly. This way, the coils are snug at the bottom of the deck. The wick has to be installed properly so that it will fill the entire wick hole. If the wick is not installed properly, there may be leaking issues. You sure do not want leaks to happen when you vape.

The coils have to be placed properly once they have been trimmed. These coils should not be placed too high so that there will be an effect on its airflow. These coils should also not be placed too low so as not to choke the air flow. You can place it 2mm above the air vent for the coils to hit the sweet spot.

Filling up the tank of the Azeroth RTA is pretty easy. What you need to do is unscrew the top cap and fill through the tank. There are two crescent fill sections that you will see when filling it up. You can either use a bottle or a dripper in order to fill it up and there won’t be any problems at all. The fill holes should not be filled over when doing so. If the fill holes are filled over, the juice might work its way into the center hole when you screw the cap.

Specifications

The Azeroth RTA is 24mm by 52mm in size. This device has a juice volume of 4.5ml. You will also notice that the triple coil deck of this device is gold plated which really looks good. Aside from that, the extra dual coil deck is also gold plated. Once you get to check the drip tip, you will see that it is stainless steel and is wide open. An extra 510 Delrin drip tip is also available for the device. The Azeroth RTA also comes with a very convenient top fill and the adjustable air flow is really easy to use. CoilART has done a great job with this one and you can be sure that this device will last a long time.

Inside the box            

When you purchase the Azeroth RTA, you will get a velocity-style deck device. It also includes the tank which is really solidly built and well machined. The box also includes all the spare parts that the device needs. There are replaceable screws included which you will be needing for the deck. There is also a set of o-rings, a spare glass, and a coil instruction card. Also included in the box is the CoilART vape band. The top cap of the device accepts 510 drip tips.

Conclusion

CoilART has made an amazing device with the Azeroth RTA. It is easy to use and has been made with high-quality materials. The Delrin top cap is also awesome and it works with 510 drip tips. There may be other RTA devices that you can find in the market today, but the Azeroth is one of the best. You can purchase the Azeroth RTA on http://www.urvapin.com/  for only $29.99.

 

 

SHARE
Previous articleMr. Good Vape Melon Head
Next articleVape Wild Review

LEAVE A REPLY