Review of Tesla Invader 2/3 Box Mod

Overview

Teslacigs Invader series has a new product that is entirely upgraded. The Tesla Invader 2/3 has an improved performance and the best part is the battery scheme. You are able to switch from a dual-battery system to triple battery system on this device.

Design and Quality

You are able to use two batteries with the Tesla Invader 2/3 with the maximum power output of 240 watts. If you use three batteries for the device, the maximum power output is 360W. This device comes with a three battery back or the flatter dual battery back. The battery back is used depending on how many batteries you use since it is wired in series. The back will have a trapezoidal shape if you use three batteries for this device. There will be no hump on the back when using two batteries for the mod. There are no magnets attached to the device since the batteries are help up by friction. 

It’s easy to remove the batteries with the triple battery back. All you have to do is place your finger on top of the battery back and push it down while holding the mod. The battery back will easily slide off using this process. The battery back has been attached firmly to the device. It is harder to remove the batteries when using the dual battery back. Since it is thinner and a little push is needed to slide off its back. You will have to use a separate charger for the batteries since the device does not have a USB port.

The device has been designed with variable voltage only. This means that this device does not have the support for temperature control coils. There are no buttons on this mod so you are not able to adjust its voltage and it does not come with a screen.

The voltage of this mod is set through the potentiometer. This is located at the bottom of the front of the device. This is detonated with 3 volts through 8volts. The device has a ¼ marking on the dial in between each number. The potentiometer does not have detents so it is not clear to identify what the setting is. You are able to set the potentiometer easily with just the use of your finger. There is just enough resistance with the device’s setting so you do not have to worry about the voltage changing inadvertently. The resistance of the coil is the basis for setting the wattage of the device.

If you look at the device closely, you will find a LED light located at the bottom of the device’s body. This makes you know better the device’s usage. The fire button is located at the upper part of the front side of the device. This device allows you to gain more comfortable usage experience.

Specifications

When you use three batteries, the device is 50mm by 42mm by 85mm in size. If two batteries are used, this mod is 35mm by 42mm by 85mm in size. The material being used for this device is die cast zinc alloy. You will see that the body is solidly built. When using two batteries, you have a maximum power output of 240w and three batteries have a maximum power output of 360W. The voltage out put a range for this mod is between 3-8 volts. The color of the LED indicator on this device is blue. You also are sure that this device is safe to use because of its safety features. You have an over puffing and reverse connection protection. The device also has an atomizer short- circuit protection, low voltage alert, overheat and over-current protection.

What’s in the Box

You get one Tesla Invader 2/3 when you purchase the device. The batteries are not included in the box. However, you are able to buy the batteries separately. An additional battery cover is also included in the package and you also will get a warning card and a user manual.

Conclusion

This device is great for those who enjoy DIY. What’s great about this is it is made with high-quality materials.This device really works well for everyday vape and it is really affordable. It only costs $38.99 and it can be bought at http://www.urvapin.com/.